Характеристики и описание
| Data for 50 V DC | AS1020-0xyz |
|---|---|
| Flange code | N1 (NEMA17/42 mm) |
| Rated supply voltage | 24…50 V DC |
| Rated current (per phase) | 1.00 A |
| Standstill torque | 0.50 Nm |
| Winding resistance (per phase) | 4.80 Ω |
| Winding inductance (per phase) | 9.50 mH |
| Rotor moment of inertia | 0.074 kgcm² |
| Resolution | 1.8°/200 full steps |
| Dimensions (r x length) | 42 mm x 48 mm |
| Weight | 0.39 kg |
| EtherCAT Terminal | EL7047/EL7037/EL7031/EL7041 |
| EtherCAT Box | EP7041-1002 |
| Bus Terminal | KL2531/KL2541 |
| Order referenceAS1020-wxyz | |
|---|---|
| w = 0 | smooth shaft with 1 flat |
| x = 0 | standard motor without second shaft |
| x = 1 | second shaft (for AS1020/AS1050/AS1060 only), necessary for encoder |
| y = 0 | no incremental encoder |
| y = 1 | incremental encoder, 24 V DC, 200 lines (only available for AS1020, AS1050, AS1060), requires x = 1 |
| y = 2 | incremental encoder, 24 V DC, 1024 lines (only available for AS1020, AS1050, AS1060), requires x = 1 |
| z = 0 | standard |
| Accessories | |
|---|---|
| EL7031 | stepper motor EtherCAT Terminal, 24 V DC, Imax = 1.5 A |
| EP7041-1002 | EtherCAT Box, industrial housing, Stepper motor module, 50 V DC, 1.5 A, with incremental encoder, 2 digital inputs, 1 digital output |
| KL2531 | stepper motor Bus Terminal, Imax = 1.5 A, 24 V, IP 20 |
| ZK4701-04x1-2xxx | supply cables for compact Drive Technology |
| ZK4000-5100-2xxx | AS2000 encoder cable, drag-chain suitable, (5 x 0.25 mm²), shielded, for EL703x/EL704x/KL253x/KL254x |
| ZK4000-6200-2xxx | motor cable for AS1000, assembled at bИли отправьте нам запрос наllion bending cycles, bending radius = 55 mm (10 x OD) |
| ZK4000-6700-2xxx | motor cable for AS1000, assembled at both ends, (4 x 0.5 mm²), shielded, 4 million bending cycles, bending radius = 55 mm (10 x OD) |
| ZK4000-5151-0xxx | AS2000 encoder cable, drag-chain suitable, (5 x 0.25 mm²), shielded, for EP704x/EJ704x |
| ZK4000-6261-0xxx | Motor cable for AS1000, assembled at both ends, (4 x 0.5 mm²), 4 million bending cycles, bending radius = (10 x OD) |
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |
Или отправьте нам запрос на e-mail: zapros@filfar.by
AS1020 | stepper motor 0.5 Nm (standstill torque)
Под заказ
Цену уточняйте
Минск ∙
Доставка
Оплата и гарантии